The XM-RM7W1 & WAC-19 kit is a newly launched test solution for the IEEE 802.11ac protocol. Based on the mature and stable Ethernet traffic testing technology developed over the years, it successfully converts wireless traffic into wired traffic for analysis and measurement.
The XM-RM7W1 module belongs to the XM-RM series of modules, featuring flexibility, reliability, and high precision. The XM-RM series modules are specifically designed for the MPT-700/1600 series chassis. They support hot-swapping and multi-user operation. The Rapid-Matrix technology enables multi-stream communication where different data frames/packets are generated simultaneously on each port, and supports multiple protocols and tags.
As an auxiliary device for the XM-RM7W1 module, the WAC-19 module stably converts wired traffic into wireless traffic. It adopts MIMO 3x3:3 transmission, supports antenna replacement, is compatible with 802.11a/b/g/n/ac technologies, and has a transmission rate of up to 1900Mbps (due to the limitation of Ethernet port speed, the actual maximum measurable bandwidth is 1000Mbps). It is compact in size and stable in performance.
Main Features:
●Supports IEEE® 802.11 b/g/n 2.4GHz + 256 QAM, with up to 600Mbps in actual tests
●Supports IEEE® 802.11 a/n/ac 5.0GHz, with up to 1000Mbps in actual tests
●Supports WPA/WPA2—PSK and WEP
●Supports Ethernet port testing of 10/100/1000 Mbps devices
●Wire-speed communication generation and analysis
●High-performance and low-cost test ports
●Supports synchronous testing of up to 4 DUTs
●The wireless connection part supports automatic acquisition/scanning/fixed SSID
●Can simultaneously test the wired traffic transmission performance of DUTs
●High-precision performance for measuring throughput, packet loss, rate, etc.
●Verifies bad and abnormal test conditions on a byte-by-byte basis for packets
●Real-time data statistics per port
●Supports simulating a Telnet client to operate DUTs